Use Wood Icing™, A Stencil And Silver Leaf To Create This Industrial Lace Canvas Art

We are sharing this post by Debbie Dion Hayes, from her blog MyPatchOfBlueSky.com


{Although this post is sponsored by Wood Icing™, the idea, experimentation, and comments are my own.}

Are you a fan of the industrial look? Do you love lace? Let’s put the two together and create this metal-look patterned artwork with lots of depth. It almost looks like a chunk of heavy solid embossed steel! My favorite thing to do with artwork it to layer it with other pieces. Everywhere. This pretty vignette is on my dresser.

Can you just imagine an entire wall of these in several metal finishes. Love it!


My inspiration pieces for this project were my treasured Moroccan bracelet and perfume bottles, purchased on an artsy trip to Marrakech. I’ve been studying them for ages and it finally came to me that Wood Icing™, a stencil, silver leaf and some glaze would be perfect to recreate the look.

Let’s do it! Normally I recommend inviting kiddos of all ages join in on projects, but since the silver leaf tends to billow everywhere, I can only imagine little fingers putting the pretty things in their mouths. So this time, older children only, please.

 

SUPPLIES



• Any size gallery wrap canvas with a wide edge. Mine is from Michaels

FROM WOOD ICING™ Textura Paste, off-set knife, Furniture Glaze in Licorice, Satin PolyAcrylic Top Coat, Graphite Chalk Paint® by Annie Sloan

FROM ROYAL DESIGN STUDIO Small Fleur de Lace stencil, or any stencil

• Any Leaf Size product like Wunda Size, imitation silver leaf in sheets or pieces called shaibin. All are available from Michaels or from online sources

• brush, foam brush, cheap throw-away brush for leaf size, 220-grit sandpaper, rags, wax paper

 

 

STEP ONE above

Paint two coats of Graphite Chalk Paint® and let dry.

 

STEP TWO

Lay the stencil in a pleasing position over the canvas. Tape in position if possible. If not, hold in place with one hand. Using the off-set knife, “butter” some Texture Paste over the stencil pattern, taking care not to push it under the stencil. When the pattern is complete, carefully peel off the stencil and wash it. Let the paste dry for about 10 minutes or so. If you need to reposition the stencil to complete the pattern, just find the design edge and add more Textura Paste. Sand lightly.

 

 

STEP THREE above

Wipe after sanding. Paint one coat of Graphite and let dry.

 

STEP FOUR

Brush on a THIN coat of leaf size. More in this case is not better. Let come to tack for 10 or 15 minutes. My photo shows too much size so you can see it. Definitely wipe away puddles of size.

 

 

STEP FIVE

Lay the leaf sheets or broken leaf pieces over the canvas and press down with your fingers. Use a soft brush to push the leaf into all of the crevasses until the entire canvas, including the edges are covered. If you missed a spot when applying the size, just add some more, let come to tack and add leaf. When finished, grab the dust buster or vacuum and get rid of all of the little bits of silver leaf.

 

STEP SIX

Brush on some Licorice Furniture Glaze and gently wipe off the excess with a rag. Pull a foam brush over the top in all directions to remove more glaze until you like the look. Do the sides as well. 

Let dry.

 

OPTIONAL STEP SEVEN

Brush on Wood Icing™ PolyAcrylic Top Coat, following directions.

Add hanging hardware, or simply prop in a niche, in a bookcase, on the mantel or on your dresser to show off artwork, special jewelry pieces and pottery like I did.

 

 

{Disclosure: This is a paid featured post in conjunction with Wood Icing™. All opinions, projects, and ideas are based on my own experience.}

An Old Dough Bowl Gets Gorgeous Using Wood Icing™ + Miss Mustard Seed's Milk Paint!

We are sharing Debbie Dion Hayes' post from MyPatchOfBlueSky.com



{Although this post is sponsored by Wood Icing™, the idea, experimentation, and comments are my own.}

I have spent many years in the faux finishing and DIY paint worlds. I can’t even begin to count the number of different products I have used. Some I love to use, and others…well, not so much. I am excited today to play with Miss Mustard Seed’s Milk Paint for the first time. The look is very “me” and the though of pairing it in a project with Wood Icing‘s Textura Paste made me jump out of bed this morning in anticipation of the possibilities.


I wanted to use the Milk Paint on raw wood. But so many items in our home are painted. So I rooted around in our attic and discovered this dough bowl. The day I bought it, I put it on the kitchen table to attend to a ringing phone and – good grief – one of the kitties came flying down the hall, leaped onto the table and the bowl and kitty flew off the table. The bowl split almost in half. The kitty laughed behind my back. The bowl has been repaired, lived on the kitchen counter and many a tomato has gone juicy in it.




I knew from experience that the Wood Icing™ Textura Paste would stick like glue to the wood. This stuff is awesome! But, I was a bit concerned about the milk paint used over the stains.

Never fear, everything worked like magic!

Here is my project! Love it for my first attempt, don’t you?




I hope you are ready to give this a try. For me it was so quick and easy, I was a bit sad it was over.

SUPPLIES



Click the links for details on how to purchase TEXTURA PASTE & MISS MUSTARD SEED PRODUCTS.

• Wood Icing Textura Paste
• Miss Mustard Seed’s Milk Paint in Lucketts Green, Wax Puck, Hemp Oil
• Royal Design Studio French Numbers Stencil
• 220-grit sand paper, paint brush, containers, wiping cloths, paint stick

STEP ONE – The Wood Icing™ Textura Paste




Clean the bowl and wipe it.

Lay out a random pattern of the numbers in the bowl. Since the shape of the bowl is not conducive to the flat stencil material, you will have to use one hand to hold the stencil down flat and the other to apply the Textura Paste. I simply used a dab on my finger to apply it through the stencil. The texture will not be very thick, so you can let the numbers dry then place the stencil back on and add another layer. One layer was fine with me.

Let the Paste dry – it only takes a few minutes. Lightly sand and wipe off the residue.

STEP TWO – The Milk Paint



Use the wax puck on any areas you want to resist the paint. I ran it around the edges of the bowl.
Put one part milk paint in a container and add one part water. I wanted more of a stain, so I added another half part water. Mix really well with a paint stick.

Paint one coat on the back of the bowl, let dry, and decide how you like the look. Mine was a stained look. Since I wanted to experiment more, I added another coat. Then I moved on to the front once I had a feel for the product and painted two coats.

After it was dry I sanded lightly and wiped.

Wow, this looks wonderful. I like how the edges are worn after using the wax.

STEP THREE – Finishing



Now I want to seal it with a food-safe, water-resistant product since this bowl is where our fruits and veggies end up.

I  brushed on a coat of Hemp Oil and waited a few minutes to wipe off the excess. I will add another couple of coats over time, following the instructions.

What do you think? I am so happy with my choice of green and the little stencils to give a bit of interest. The Textura Paste and the paint are imperfect, and look like they are just made for the wooden bowl. Did you notice the tomato juice and other stains disappeared and even seemed to enhance the look? Pretty cool.





This bowl will not be going back up in the attic!

{Disclosure: This is a paid featured post in conjunction with Wood Icing™. All opinions, projects, and ideas are based on my own experience.}